ASI 3551 SWING-UP GRAB BAR
- Ideal for barrier free washrooms
- Stainless steel
- Meet and exceed 2010 ADA Accessibility Standards and ANSI A117.1
- Swing-up grab bar can support loads in excess of 500 lbs (227 kg)
Swing-up Grab Bar shall be fabricated of stainless steel type 304 alloy 18-8. Grab bar tubing shall be 18 gauge x 1-1/4″ diameter [Ø32]. Mounting bracket shall be 9 gauge (5/32″ thick [3.8]) plate with seven (7) 1/4″ diameter [Ø6.4] mounting holes provided. Bar shall have 1-1/2″ diameter [Ø38] tubing hinge and shall have a solid bar axle with adjustable friction sleeve balance. All exposed surfaces shall be satin finish. Structure shall be of welded construction. All exposed edges and corners shall be radiused and burr free. Tension for bar movement is accomplished by hex head clamp bolt provided. Grab bar shall be operable with only one hand. Bar mounting plate shall have a top arm stop bumper to prevent raised bar from banging into wall. Grab bar tube shall have a plastic end cap to cushion contact with wall plate in use position. STRENGTH ASI grab bars are designed to meet and exceed 2010 ADA Accessibility Standards and ANSI A117.1 so that fabricated product shall be of adequate strength to exceed specification compliance by a Factor of Safety of 2. Swing-up grab bar can support loads in excess of 500 lbs (227 kg) when properly installed. Mounting to the wall is a critical part of the system to meet this requirement. The fastener system must be adequately sized to withstand the shear, tension or pullout, and torsion loads generated by the maximum loading.